Bunker Rake Implements and Accessories
58” – straight blades.
Sand Cultivator, Stainless Steel
58” – stainless steel, flexible
spring tines loosen the sand while
protecting the bunker edges.
Construction Leveling Blade
58" - ideal tool for tee and green construction.
Rolling blade for bunker edging.
Sand Cultivator triangle-shaped blades
58” – triangle-shaped blades.
REAR-MOUNTED FINISH RAKES AND BRUSHES
Fast economical way to pick up cores from greens. Labor saving and very cost efficient
Steel Tournament Series Rake
72" and 84" - with stainless steel spring tines shown with optional finish brush to provide a smoother finish versus a grooved finish.
Tournament Series Rake with Flex-Brush
72" and 84" - hinged 3-section stainless steel spring tines, 3 trowel plates with adjustable grooved blades, 4 grooved floating finish blades, rubber grommets for noiseless transport, outer sections fold to reduce transport width. Outer rake sections flex in tight turns to reduce unsightly “doughnuts”. The final finish is a smooth rushed appearance.
72" -5 spring steel fan rakes mounted to a floating mount bar. Provides a less aggressive grooved finish, also works well for debris removal from bunkers. Not pictured 13-319 72’’ Fan Rake Kit which mounts to rear of 13-758 Pro Rake.
Brush Attachment Kit
For 72’’ and 84’’ finish rakes - final finish is a smooth brushed appearance in lieu of the grooved finish. A soft, natural, windblown look.
Serrated Rubber Rake
With optional finish brush.
72" - an upgraded version of our classic rake that was developed over 30 years ago – hinged 3-section steel tine segments, 3 grooved trowel plates and 5 grooved floating finish blades.
40” - aluminum blade, replaceable wear plate available in straight blade or adjustable angle feature configurations. Easy and convenient stow/deploy operator handle, fully adjustable.
40” - aluminum blade, replaceable wear plate available in straight blade or adjustable angle feature configurations. Hydraulic operation of stow/deploy.
Typhoon Plumbing System
Remove standing water from bunkers, turf areas or hard surface. 600 gpm high-volume pump for liquids and semi-solids, 6.5’ suction snorkel ensures that the prime mover stays dry. 11 hp gas engine, electric start.
66" - hinged scarifier tine bar, leveling blade, ideal tool for tee and green construction.
Roller Brush Spiker System
A quick-attach 3-section system for rolling greens or newly sodded areas; work topdressing into the soil profile after aeration; spike your fine turf to allow moisture, air and nutrients into the root zone. Each component can also be purchased separately.
Engine-Powered Leaf and Debris Blower
10 hp gasoline engine, blower 2800 CFM, 190 mph makes quick work of leaf and debris removal.
Dry Fertilizer and Chemical Spreader
Quickly and easily apply fertilizer or topdressing sand to fine turf, salt and sand to hard surface for ice control. 100 lbs. polyethylene hopper (rustproof), 12-volt powered. (not pictured.)